Upgraded manual tire changing nose kit, featuring silver guiding cones, thickened welded brackets, and lever-effort-saving design. It assists in adjusting the position of the nose to facilitate the disassembly and assembly of large vehicle pneumatic tires, reducing rim collisions. When working on a hard surface, apply force steadily. After use, clean and maintain it. Suitable for auto repair and mobile tire repair scenarios.

The main frame is made of thick pipe welded together and is treated with paint on the surface, providing good rust prevention capabilities. The core of the nose is the main force-bearing component, and the contact position of the tire is designed with anti-slip structure. During operation, it grips the tire edge, and by leveraging the lever principle, it lifts the tire rim to separate the tire from the wheel hub. The kit comes with silver cone accessories, which serve as auxiliary guides during the disassembly process, facilitating the smooth insertion or removal of the tire lip from or onto the wheel rim, thereby reducing the wear on the tire lip during the operation.This manual tire changer's nose kit, equipped with silver cone accessories, is mainly used for the disassembly and assembly of large vehicle tires. It is suitable for auto repair shops and mobile tire repair operations, assisting operators in completing the separation and disassembly of tires, thereby reducing the physical exertion during tire removal and installation.


The equipment is of manual mechanical structure and does not require an external power source. It is portable and movable, allowing it to be used for mobile tire repair when going out. The knob-type locking structure enables adjustment of the height and position of the nose, adapting to various tire specifications. The operation is simple and the learning curve is not high. When disassembling large vehicle vacuum tires, it can assist in pressing the tire lip away from the rim, facilitating subsequent tire removal operations and reducing the use of a hammer to strike the tire, thereby lowering the probability of wheel rim damage.

Before use, place the equipment on a flat and solid surface, check if all welding positions, the nose, and locking components are intact. Place the tire properly, align the nose with the tire lip, tighten the fixing knob, and slowly apply force to lift the tire edge. Use the silver cone accessory as an auxiliary guide during the process to gradually separate the tire rim. Do not apply force too quickly or forcefully to avoid deformation of the components; operators should maintain a safe position to prevent tire rebound and collision.

This tool is only an auxiliary tool for tire disassembly and assembly. The operation still needs to follow the standard tire removal procedures. After each use, clean the equipment of dirt, oil, and sand, check if the nose and cones are worn or deformed, apply an appropriate amount of lubricating oil to the movable joints, store it in a dry environment, and slow down rusting. If the nose shows severe wear over time, you can replace the accessory separately. It is suitable for the repair and disassembly of vacuum tires on trucks and vans, and is a practical tire repair auxiliary tool for mobile tire repair and auto repair workshops.